Correct stud distance

[emphasis303]

Hi guys

Whats the correct stud distance for 1220x600 9.5mm plasterboard?

Cheers

 

[ColJack]

wow.. small sheets..
what are you boarding?

centers are usually either 450 or 600 depending on board width ( 600, 900, 1200 wide etc.. )

 

[emphasis303]

Thanks for the reply

450 it is

Its a small outroom and the big sheets wont fit the car and I cant wait for delivery.

once again thank you

 

[dextrous]

If you haven't already bought them, I recommend you use 12.5 mm

 

[roy c]

The centres for 2400x1200mm boards are 400 centres allow for your boards that either start or run into your corners....

 

[roy c]

wow.. small sheets..
what are you boarding?

centers are usually either 450 or 600 depending on board width ( 600, 900, 1200 wide etc.. )
Not 1200 boards......

 

[Richard C]

If you haven't already bought them, I recommend you use 12.5 mm

If it's a wall, always use 12.5m boards; & buy full size 2.4m x 1.2m boards, even if you have to cut them, it's much cheaper.
Stud spacing @ 400 virtical as stated but you also need intermediate noggins at 1200mm.

 

[noseall]

1800mm long boards - 450mm c/c.

2400mm long boards - 40mm c/c.

I would never use 600mm centre spacing and would never use 9.5mm boards. The two together would be fatal.