- Joined
- 1 Jun 2004
- Messages
- 698
- Reaction score
- 19
- Country
The heading is diificult but what I have here is a Creda T620CW tumble dryer which in the past has been dropped and therefore the base and cabinet around the condenser has been fractured. I believe that this allows too much air and moisture to re-enter the cabinet and causes the machine to cut out.
I need to either rebuild the plastic structure or join all the gaps with a suitable tape which is temperature and moisture resistant, but will still allow the condenser to slide in and out. Any suggestions?
I need to either rebuild the plastic structure or join all the gaps with a suitable tape which is temperature and moisture resistant, but will still allow the condenser to slide in and out. Any suggestions?
