Dear Experts,
I’m going to make a cupboard from a piece of ply that I have spare. Nothing complicated, but it is only 12mm and I see that the normal kitchen cabinet door hinges require more thickness, at least 14mm. (I also don’t have a suitable tool to make the large hole those hinges need.) Can anyone suggest a suitable hinge? The doors will be overlaid, like typical kitchen cabinet doors, and ideally sprung.
I am aware of this hinge:
https://www.ironmongerydirect.co.uk/product/easy-on-sprung-hinge-106x41x24mm-pair-534761
But I’m not sure if it is for overlaid or inset doors.
Any suggestions?
I’m going to make a cupboard from a piece of ply that I have spare. Nothing complicated, but it is only 12mm and I see that the normal kitchen cabinet door hinges require more thickness, at least 14mm. (I also don’t have a suitable tool to make the large hole those hinges need.) Can anyone suggest a suitable hinge? The doors will be overlaid, like typical kitchen cabinet doors, and ideally sprung.
I am aware of this hinge:
https://www.ironmongerydirect.co.uk/product/easy-on-sprung-hinge-106x41x24mm-pair-534761
But I’m not sure if it is for overlaid or inset doors.
Any suggestions?
Last edited: