Probably right there.Yes its the only thing they are fit for
I once had a nice pair of cutters which had a M3.5 shear.
Probably right there.Yes its the only thing they are fit for
Thanks been looking for a cheap pair of them, do you know if the holes are threaded
I do that but its a pain sometimes, How do you hold the screwI use a junior hacksaw, then file the burrs off. No need for special tools.
Thanks been looking for a cheap pair of them, do you know if the holes are threaded
Ah Just see post 9
Great as an apprentice i had the thin crimpers to do that and these look a bit more beefy, the ones i have seen only had holes and no thread.Yes, you screw the screw through from the threaded side of the cutter, as far as where you want it cut, then just squeeze and unscrew your shortened screw. Unscrewing it, cleans up the threads.
Great as an apprentice i had the thin crimpers to do that and these look a bit more beefy, the ones i have seen only had holes and no thread.
They will be handy.
I dont use 4mm brass much nowadays, only really want them for 3.5, they should be ok do you think, I have most lengths so wont get used much , for 4 quid I think i will have a look.They are only useful for brass, steel is just too much for them to cut.
I do that but its a pain sometimes, How do you hold the screw
I do that but its a pain sometimes, How do you hold the screw
I would never do that with my chrome plated Knipex pliers, i have done it with my cheap long nose ones thoughWind on a nut all the way.
Grip screw in pliers with cut position against edge of pliers.
Cut with blade rubbibg against the pliers.
File a bit of chamfer around cut end.
Undo nut -which will re cut any burred thread as its undone
I did actually buy a portable small vice that was on offer for a fiver, specifically to do thatI hold the bit I want to dispose of in my vice. I so rarely need to cut screws it seems pointless buying one of those crimpers/thread cutters combined, especially as any screws I want to cut are often a different size.
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local