All,
I ran out of oil at the weekend, have now had a delivery but boiler is in lockout, I assume it needs a bleed. It's a Danesmoor 20/25, using an Electro Oil Inter B11 burner.
I've read countless threads on various forums where people have adjusted the pressure rather than the bleed valve, so now I'm paranoid about doing the wrong thing.
Some people advise bleeding by disconnecting the flexi hoses, others say DON'T DO THAT and advise loosening the pressure gauge port.
I've called many engineers and they're all too busy to come out until next week, meanwhile my family is living in a very cold house.
Can anybody advise on the best way to bleed this pump?
Thanks
Jim
I ran out of oil at the weekend, have now had a delivery but boiler is in lockout, I assume it needs a bleed. It's a Danesmoor 20/25, using an Electro Oil Inter B11 burner.
I've read countless threads on various forums where people have adjusted the pressure rather than the bleed valve, so now I'm paranoid about doing the wrong thing.
Some people advise bleeding by disconnecting the flexi hoses, others say DON'T DO THAT and advise loosening the pressure gauge port.
I've called many engineers and they're all too busy to come out until next week, meanwhile my family is living in a very cold house.
Can anybody advise on the best way to bleed this pump?
Thanks
Jim