Danfoss TP9000 To hive or other

[mambo1701]

Hi all

My first post

I have a traditional boiler with hot water tank in a cupboard downstairs

And the following

Porrerton promax 15 SL
Danfoss TP9000 Programmer
Danfoss TP5000SI
Danfoss TS2 Sensor

The above are awful, screen is too small, not backlit and it’s a pain to program and whenever I want to look at it I have to find a torch

I’m looking to upgrade, possibly a hive but getting information off hive support on how to wire everything up is hard work

Does anyone have any guidance on what to do with each wire for the hive system

Or does anyone recommend replacement controllers, looking for a decent backlit display on both controllers at a minimum, but hive would be ideal as can control from my phone

Pics attached for reference

Thanks in advance

 

[CBW]

L,N,E are pretty self explanatory. The heating on, hot water on would go to the NO. You don’t do away with the sensor, and link the 2 wires for the thermostat at the thermostat end or in the wiring center. You would need to purchase a dual channel, whichever you decide to install.