- Joined
- 7 Jan 2019
- Messages
- 4
- Reaction score
- 0
- Country
Our house is fitted with a Danfoss TP9000 programmer with remote sensor TS2 which controls DHW and downstairs heating. Upstairs is controlled via a TP5000Si programmable thermostat. Both work in conjunction with a sealed hot water cylinder fitted with 3 motorised valves controlling DHW plus the 2 heating zones.
Can anyone refer me to the official wiring diagram for connecting these components please? Unfortunately the programmer has been very badly sited so I want to investigate the possibility of moving it, which would require rewiring from the central wiring centre fitted in the airing cupboard. I have tried the usual Google search but unfortumately cannot find anything that appears to match our installation.
Can anyone refer me to the official wiring diagram for connecting these components please? Unfortunately the programmer has been very badly sited so I want to investigate the possibility of moving it, which would require rewiring from the central wiring centre fitted in the airing cupboard. I have tried the usual Google search but unfortumately cannot find anything that appears to match our installation.
