Dimmer Switch?

Joined
26 Aug 2007
Messages
156
Reaction score
1
Location
Lancashire
Country
United Kingdom
Hi

I am working on designing and making my own bedside lamp. I want a dimmer switch on it if possible.

Can I buy a typical wall dimmer from Toolstation for example and use it? If so, what would I need? I dont understand the difference between 1 gang and 2 gang, 1 way and 2 way -.

How would I wire it?

Basically I want to have a wire from the plug that comes from the wall, into the base of the lamp that contains the dimmer then a wire up the stem to the bulb.

Any sound, helpful advice will be appreciated.

Thanks in advance!
 
Sponsored Links
Sponsored Links
Doesn't the dimmer work 'backwards' though with L2 like volume in reverse?.
No, a dimmer with an L2 terminal just incorporates a 2-way switch rather than a simple on/off. The rotary control still works the same way (clockwise for brighter) whether you use L1 or L2.
 
Can't get my head around this. Line to centre tap. So each end being 0 resistance to max so I would have thought other way around would be reverse of this.
 
Can't get my head around this. Line to centre tap. So each end being 0 resistance to max so I would have thought other way around would be reverse of this.
If it were a simple potentiometer with Com to the wiper and L1 & L2 at each end of the track, then yes, whether you connected to L1 or L2 would affect which way you turned the knob to increase brightness. But these modern dimmers aren't just a rheostat, they're an electronic circuit incorporating a triac to control lamp brightness.
 
If it helps, imagine a simple 2-terminal rheostat with one side connected to the common of a separate 2-way switch. Now imagine putting the two devices together into one package with the 2-way switch part operated by pushing the knob, but electrically still connected the same way. That's conceptually what you have with the modern 2-way dimmer, it's just that the rheostat part is actually a more complicated electronic circuit.
 
OK I have to now re open this thread.

It looks like we need an inline dimmer switch that will work with a 6w led bulb.

Can anyone recommend such an item?

Cheers
 
Do you already have the LED bulb?
Some LEDs are not dimmable. Those that are dimmable will tell you what sort of dimmers they work with.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top