Does thermostat in coldest area make sense?

I think I have said often enough that I don't think that's correct.
OK a bit of a generalisation, using the likes of Wiser, there is no real reason to have a wall thermostat, the TRV can do it all.

The USA version of Nest uses sensors in many rooms linked to the main thermostat, and does not need any TRVs to be linked, likely as in the USA they use hot air not water to move heat around the house.

There is no reason why one should not have a wall thermostat in every room, so the wall thermostat controls minium temperature and the TRV maximum temperature, but in the main we compromise, I call it near enough engineering, and the main point is the boiler need to modulate so on/off control is not really very good.
 
there is no real reason to have a wall thermostat
There is no reason why one should not have a wall thermostat in every room
Well, one or the other. Or none of those.

I know that some bespoke/odd properties need bespoke heating controls but the vast majority just don't.

Room stat to suit the boiler and manual TRV's is all I ever fit. And generally see fitted to be honest.
 
We should design the system to suit the home and occupants, the idea of one design suits all, is clearly berrying ones head in the sand.

The main point, is with a condensing modulating boiler, the control should be analogue, as to if that is an OpenTherm wall thermostat or a TRV is really not important, as long as the device does not cause the boiler to turn on/off too often.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top