-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Downlight stuck and cannot replace bulb
- Thread starter dmuk
- Start date
- Joined
- 16 Jul 2023
- Messages
- 1
- Reaction score
- 0
- Country
What worked for me was, placing the head of a closed pair of pliers behind one of the three pins(that are used to turn the fitting around) and lightly tapping the back of the pliers' handles with a hammer to put more pressure/force on the pins than any of our hands could, and thereby release the jamming/locking inside the fitting.
The two pins, as you know, belong to the lamp. So pull them out. The (“MR16”) lamp socket will probably be damaged do you’d need a new lamp socket.
HOWEVER - the halogen lamp that you are trying to replace are obsolete. You can’t buy them any more.
You need to move to LED lamps. Unfortunately you will also need to change the existing 12volt transformer (up in the ceiling ) for a LED driver. Or remove the transformer altogether and move to a 230v GU10 lamp. You’d need to change the bulb holder if you go that way.
HOWEVER - the halogen lamp that you are trying to replace are obsolete. You can’t buy them any more.
You need to move to LED lamps. Unfortunately you will also need to change the existing 12volt transformer (up in the ceiling ) for a LED driver. Or remove the transformer altogether and move to a 230v GU10 lamp. You’d need to change the bulb holder if you go that way.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
