- Joined
- 18 Oct 2020
- Messages
- 6
- Reaction score
- 0
- Country
Hi Guys,
I'm trying to install and set up a Drayton Wiser kit 1 with 6 radiator thermostats for several days. The heathub turns on the boiler and starts heating, BUT hot water is constantly circulating in all of the radiators. For example I want to heat the kitchen up to 22 Celsius from 18 (only the kitchen), but leave all the other rooms (zones) at 18. The boiler turns on after setting the temp in the Wiser app and starts to heat the water and the temperature goes up in all of the zones. It seems heathub does not close any of the TRVs even if heating is not needed in that zone.
I tried to recalibrate the radiator thermostats several times, but the problem is the same.
Does anyone have an idea of what can be wrong?
I'm trying to install and set up a Drayton Wiser kit 1 with 6 radiator thermostats for several days. The heathub turns on the boiler and starts heating, BUT hot water is constantly circulating in all of the radiators. For example I want to heat the kitchen up to 22 Celsius from 18 (only the kitchen), but leave all the other rooms (zones) at 18. The boiler turns on after setting the temp in the Wiser app and starts to heat the water and the temperature goes up in all of the zones. It seems heathub does not close any of the TRVs even if heating is not needed in that zone.
I tried to recalibrate the radiator thermostats several times, but the problem is the same.
Does anyone have an idea of what can be wrong?