Drilling joists to pass cables
- Thread starter Jupiter01
- Start date
The drill bit for the hole. I am familiar with the zones suited for drilling
- Joined
- 28 Jul 2014
- Messages
- 1,969
- Reaction score
- 566
- Country
Armeg Wood Beavers are very quick through joists/studs/etc, and these particular ones being the stubby version, are handy for tight spaces...
https://www.amazon.co.uk/dp/B00MISEWJM
...but you do need a cordless drill with a good old amount of torque for the larger sizes.
https://www.amazon.co.uk/dp/B00MISEWJM
...but you do need a cordless drill with a good old amount of torque for the larger sizes.
Lighting and ring mains cable
I find the Bosch flat bits with the threaded tip, as you mentioned, to be the best.
If you can get an angled drill, you will get the best results.
If you can get an angled drill, you will get the best results.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
