edging for a worktop

[steven0161]

Can anyone tell me where i can buy a single piece of metal edging for a worktop thats 2.1 metres long and 30-40mm deep. i cant find anything longer than 630mm.

any help really appreciated

 

[big-all]

could be wrong

but i think they are specificly for finnishing "cut lengths" and ends where you choose not to use iron on strips

so only in the maximum of 925ish for the ends off double edged worktops

 

[captainfly]

It all depends on the look you are after, what I did in my kitchen was use unequal aluminium angle (you'll have to find a stockholder, try yellow pages), as you can get hold of very long lengths (upto 2m from B&Q and much longer from stockholder) to attach it I used silicone )black to match worktop) and mirror screws )drilled first obviously) you could always paint the aluminum to match,. but a timber strip would work (as a joiner)

Hope this is of some help

 

[Diyisfun]

I used 2 unequal widths of wood mouldings, gives a decorative edge, just glued & pinned it.