Bosch jigsaw blade for 40mm laminate worktop

[ModernMaterials]

I have a single lug type bosch jigsaw and want to know the best blade to use for cutting 40mm laminate worktop.

The T101BR downcutting blade has been mentioned in these forums but i dont know if it can cut up to 40mm.

Can anyone tell me the best blade to buy for this saw type for 40mm laminate?

All advice greatly appreciated

 

[Scrit]

It can. Alternatively mark and cut from the underside with a fine-tooth upcut blade. Helps if you drill out the corners first an "join up the dots" so to speak

Scrit

 

[masona]

The T101BR downcutting blade

Remember to put more pressure on the jigsaw otherwise the jigsaw will bounce up

 

[ModernMaterials]

Thanks very much for the replies am lookin for best price on that blade now.

 

[Scrit]

The T101BR downcutting blade

Remember to put more pressure on the jigsaw otherwise the jigsaw will bounce up

Also turn the orbit action OFF!

 

[Thermo]

and go nice and slow as the blade will have a tendency to curve if you push forward too much, giving a sloping cut downwards (if that makes sense!)