- Joined
- 14 Feb 2019
- Messages
- 4
- Reaction score
- 0
- Country
Hi all, I recently replaced the fan on my oven (CDA). Quite a big job for me as i;m no electrics man. The new fan is quite different from the old one but fits nicely. I noticed on the old motor that there was no indication as to where the two wires ( yellow and blue ) should connect to which terminal. The new motor terminals are placed quite differently to the old ones so couldn't really copy. All has been working fine for several days, then this evening the oven stopped. I have checked the fuses, and all are good. Can anyone tell me is this coincidance or have I put the wires on the wrong terminals and caused some damage elsewhere. Appreciate your thoughts on this coz I'm baffled.. Phil