electric oven & gas hob (ignition) connection

[benjet]

Hello, Can anyone give me the straight facts before I employ a sparky ( so I dont get ripped off)
I want to connect a 2.2kw oven that is supplied with a 13a plug and the ignition for a gas hob.
There is a cooker switch (with socket) above the worktop approx 3m from the consumer unit on a 6mm t&e radial circuit with a rewireable 30a fuse. From the cooker switch there is 750mm of 6mm t&e to the oven connection unit under the worktop. Is it possible connect both the oven and gas hob ignition to the connection unit. Any ideas?
Many Thanks

 

[Taylortwocities]

Yes, easy.

Sparky removes the existing cooker connection unit and back box. Replaces back box with a double box and fits a standard double socket.

Plug cooker into one socket, hob ignition into the other. Job done.

EDIT: even easier. Fit one of these to the existing connection point http://www.tlc-direct.co.uk/Main_In...dex/Sockets_1_to_2_Gang_Conversion/index.html

The only snag is that the plugs (and their fuses) will be behind the oven so you'd have to pull the oven out if there is a problem.