Had this a couple of years and it's always been fine, until today, i came to use it after it'd been stood for the winter (in a heated garage, so no frost or water damage), at first it tripped the RCD, thought nothing of it and reset it, stayed on this time, however, the pressure washer is completely dead, with the exception of the green power LED. This is lit.
I then disconnected it and checked all connections, when i reconnected it, the RCD didn't trip but now the unit is completely dead.
Any ideas as to what to check?
I'm quite competent at repairing things, just not had chance to have a good look at it yet (had to wash the bike by hand!), is there anything in particular i should look out for?
Thanks in advance!
I then disconnected it and checked all connections, when i reconnected it, the RCD didn't trip but now the unit is completely dead.
Any ideas as to what to check?
I'm quite competent at repairing things, just not had chance to have a good look at it yet (had to wash the bike by hand!), is there anything in particular i should look out for?
Thanks in advance!