Good evening,
We need some advice please.
We are currently changing our basin and tap, and have purchased a Grohe Tap which is ready to be fitted.
Currently we have a mixer tap installed with flexible pipe connection and a chrome waste and trap. (Some pictures are below of our current install and also the grohe fitting)
Ive borrowed a vernier and the waste pipe nut has a diamater of 44.61mm, the pipe is 35mm going into the wall.
We are going to fit this waste basin plug:
http://www.screwfix.com/p/captive-basin-waste/64920
So my questions are:
1) to fit the grohe flexible tap connection pipe which appears to be smaller than 15cm isolation valve connection. What adapter do we need for our fixings? I would like it to be as simple as possible. (link to screwfix or ebay would be useful)
2) Could you advice which waste trap and pipe parts I would need to purchase? (again links to screwfix would be useful)
3) Anything I need to consider or anything additional I need to purchase?
Thank you in advance!
We need some advice please.
We are currently changing our basin and tap, and have purchased a Grohe Tap which is ready to be fitted.
Currently we have a mixer tap installed with flexible pipe connection and a chrome waste and trap. (Some pictures are below of our current install and also the grohe fitting)
Ive borrowed a vernier and the waste pipe nut has a diamater of 44.61mm, the pipe is 35mm going into the wall.
We are going to fit this waste basin plug:
http://www.screwfix.com/p/captive-basin-waste/64920
So my questions are:
1) to fit the grohe flexible tap connection pipe which appears to be smaller than 15cm isolation valve connection. What adapter do we need for our fixings? I would like it to be as simple as possible. (link to screwfix or ebay would be useful)
2) Could you advice which waste trap and pipe parts I would need to purchase? (again links to screwfix would be useful)
3) Anything I need to consider or anything additional I need to purchase?
Thank you in advance!