in the process of thinking about refitting bathroom floor and tiling it but in the past when ive done it always regretted not fitting underfloor heating-so this time im gonna have a go.
just after some info as ive seen the matting stuff in the tile centres and wondered if its anygood-if so waht makes are good
the existing floor is floorboard so was either thinking of plying over with either 12mm or 18mm(which would be the best) and also with it being a bathroom would it best be marine ply..
will the matting have to be full floor size or mainly in the middle so heat radiates out..
is this matting ok directly over the ply...
can a stat be used to control temp...
also whats the best floor tile adhesive to use with this matting.
thanx don
just after some info as ive seen the matting stuff in the tile centres and wondered if its anygood-if so waht makes are good
the existing floor is floorboard so was either thinking of plying over with either 12mm or 18mm(which would be the best) and also with it being a bathroom would it best be marine ply..
will the matting have to be full floor size or mainly in the middle so heat radiates out..
is this matting ok directly over the ply...
can a stat be used to control temp...
also whats the best floor tile adhesive to use with this matting.
thanx don