Are you sure you mean that?I now have a 32Amp mcb from the consumer board protected by an RCBO
1) I'm not sure exactly what you mean by "I have managed to hide the box high up inside the tall housing unit", but on the face of it that sounds like it contravenes 132.12 and 513.1.also connected at the consumer board going to the kitchen which is connected into a 45 Amp double pole switch with 2 4mm cables feeding into a small high IP rated box. I have fixed into the box using Din-Rail 2 16 Amp MCB's each supplying the oven and combi/microwave both rated at 16Amps. I have managed to hide the box high up inside the tall housing unit. If you think this still breaks any regs please feel free to reply before the big switch on
Using what size of cable?What i mean is that my supply to the kitchen is 32A , protected by a 32A MCB.
Why so oversized?Each appliance (oven/microwave) is then wired to 2 seperate 16A MCB's housed in the kitchen tall unit using 4mm cable.
To do with accessibility - maybe someone with a soft copy can paste the text in here.Could you please be more specific with the reg codes you quoted that this installation might be breaking
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local