I have just installed a double oven using a 10mm cable back to a 32amp breaker. There is an cooker isolation switch in between and a connector between the inbuilt cooker cable and 10mm cable.
Everytime I put the power on from the isolation switch it trips. I realised it could be the cooker but I was also wondering if this could be because the breaker is 32 amp.
The inbuilt cable from the cooker is a small gauge to that of the 10 mm.
Any help would b appreciated.
Phil
Everytime I put the power on from the isolation switch it trips. I realised it could be the cooker but I was also wondering if this could be because the breaker is 32 amp.
The inbuilt cable from the cooker is a small gauge to that of the 10 mm.
Any help would b appreciated.
Phil