Maybe a stub brick plinth in front of the existing brickwork with 25mm celotex sandwich, using cant bricks to finish. 
Maybe a stub brick plinth in front of the existing brickwork with 25mm celotex sandwich, using cant bricks to finish. Sponsored Links
B
boydey
taken it up to the sill, or just the 1st cours of bricks?
Could you use a RIW sealent/Membrane over the the facing of the exposed concrete slab
Could you use a RIW sealent/Membrane over the the facing of the exposed concrete slab
Take it up to necessary height, i.e. a course or two above the slab or set it higher if it looks better.
A sealant may deal with any moisture penetration but i doubt this is the issue as it will not prevent cold bridging.
Why did you leaver the toe of the garage slab in place anyhow? It is asking for trouble in my opinion.
B
boydey
that sounds fine, would i also need to take it below gnd as well, ie over the slab.
Sponsored Links
The plinth would need to go down to foundations and include a dpc.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
