- Joined
- 28 Sep 2018
- Messages
- 2
- Reaction score
- 0
- Country
I live in a fairly modern Timber Frame house with an integral garage (one of them cut and paste jobs on an estate) and I would like to remove the garage door and replace it with a window. The window will be full width and about 60% of the height of the current garage door.
I was planning a few coarses of bricks under the window for the outer leaf and insulated timber frame for the inner leaf. I was wondering if I could leave the existing full height cavity closers in place so that the space under the window is its own little cavity or if I should cut them to the height of the window and open the cavity up?
Any other hints or tips much appreciated
I was planning a few coarses of bricks under the window for the outer leaf and insulated timber frame for the inner leaf. I was wondering if I could leave the existing full height cavity closers in place so that the space under the window is its own little cavity or if I should cut them to the height of the window and open the cavity up?
Any other hints or tips much appreciated