I get the error "FUSE/BATTERY FAULT) on a Gadtec contour LCD RKP. This happens only when I switch off the electricity in the house and the alarm system runs off its battery, which a 12V PowerSonic PS-1270 inside a Gardtec 593 control unit.
My assumption was that the battery was flat as the alarm had to run off its batter for a day or so. But since the battery is rechargeable and the system has now being connected to the main electricity for more than 24 hours, this cannot be the problem
Any idea? Inside the control unit there are two fuses, but they seem all right.
My assumption was that the battery was flat as the alarm had to run off its batter for a day or so. But since the battery is rechargeable and the system has now being connected to the main electricity for more than 24 hours, this cannot be the problem
Any idea? Inside the control unit there are two fuses, but they seem all right.