hi, I’m going to need to fix either a basin or vanity that has to be wall hung. I’m concerned about what’s behind tiles not being great for good fixings
My wall make up is bricks-thick ancient plaster-dot and dabbed plaster board then the tiles.
The bricks are probably about 3” from finished wall and old too.
If I drill and hit drywall adhesive that would probably be ok but if I feel I drill straight through the plasterboard, should I maybe try to squirt one of these epoxy resin things into my fixing hole, then re-drill?
Something like this
https://www.screwfix.com/p/rawlplug...MIy-WGxdbz5AIV2OF3Ch1qEw1wEAQYAiABEgJ4yvD_BwE
Never used likes of it before.
Sound a plan?
Thanks
My wall make up is bricks-thick ancient plaster-dot and dabbed plaster board then the tiles.
The bricks are probably about 3” from finished wall and old too.
If I drill and hit drywall adhesive that would probably be ok but if I feel I drill straight through the plasterboard, should I maybe try to squirt one of these epoxy resin things into my fixing hole, then re-drill?
Something like this
https://www.screwfix.com/p/rawlplug...MIy-WGxdbz5AIV2OF3Ch1qEw1wEAQYAiABEgJ4yvD_BwE
Never used likes of it before.
Sound a plan?
Thanks