Hi, I have a Glow Worm 24ci Combi boiler with a digital pressure gauge on the front. Last night my bird discovered it was reading only 0.6 bars and it states on the housing that i requires at least 0.7 to operate. There is even an annoying fault light that has not only come on but is flashing too.
Here's what I tried:-
1 - twiddle the knob underneath the boiler which is supposed to repressurise - It didn't
2- bleed all radiators - starting from the bottom of the house working up to the lads loft conversion - nothing until i got to the loft and then air could be heard hissing for at least 30 seconds maybe a minute.
3 - looked at gauge - it said 0.3 bar.
4 - turned it all off and went to bed ( to late for romance apparently)
5 - woke up this morning turned it on had a look at it again and gauge is now flipping between 0.0 bar and 0.3 bar
Is by boiler dead then? and how long does it actually take to repressurize - no water is heard rushing in when I open the filling loop...
Here's what I tried:-
1 - twiddle the knob underneath the boiler which is supposed to repressurise - It didn't
2- bleed all radiators - starting from the bottom of the house working up to the lads loft conversion - nothing until i got to the loft and then air could be heard hissing for at least 30 seconds maybe a minute.
3 - looked at gauge - it said 0.3 bar.
4 - turned it all off and went to bed ( to late for romance apparently)
5 - woke up this morning turned it on had a look at it again and gauge is now flipping between 0.0 bar and 0.3 bar
Is by boiler dead then? and how long does it actually take to repressurize - no water is heard rushing in when I open the filling loop...