Hayter 48 Remove Pull cord cover ?
- Thread starter pidgeon1
- Start date
Sponsored Links
The plastic vent screen pops off - put a screwdriver in the outer slots and carefully lever.
The steel cover should have bolts at the top, and also at the back of the engine.
John
The steel cover should have bolts at the top, and also at the back of the engine.
John
Thanks John, Yes I saw the bolts they look easy enough it was removing the cover that foxed me.The plastic vent screen pops off - put a screwdriver in the outer slots and carefully lever.
The steel cover should have bolts at the top, and also at the back of the engine.
John
Now to rub down and coat with
Hycote Black Engine Enamel 400ml.
should be a good mower when finished.DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links