Hi all,
Ihave used search and came across the following post......
//www.diynot.com/forums/viewtopic.php?t=227601
I have a simalar problem,
i need to span a 1.5m opening and have only got height to allow for a 100x70 lintel and then put on the wall plate which will be supporting the rafters of the roof,
would it be ok to use a length of 150x100 c16 timber for the lintel and wall plate in one? the width of the extension internally is 3.10m.
so if i got a length of c16 timber 150x100 x3.10m would this be ok to use?
also as in the post i pasted above i have a low slope roof so need to keep height above the door to be nomore than stated.
Thanks for any help.
jsmithy.
Ihave used search and came across the following post......
//www.diynot.com/forums/viewtopic.php?t=227601
I have a simalar problem,
i need to span a 1.5m opening and have only got height to allow for a 100x70 lintel and then put on the wall plate which will be supporting the rafters of the roof,
would it be ok to use a length of 150x100 c16 timber for the lintel and wall plate in one? the width of the extension internally is 3.10m.
so if i got a length of c16 timber 150x100 x3.10m would this be ok to use?
also as in the post i pasted above i have a low slope roof so need to keep height above the door to be nomore than stated.
Thanks for any help.
jsmithy.