Help needed for changing an old 2 way 2 gang switch with a modern touch switch

[Harry_W]

Hoping someone can help. I'm changing an old 2 gang 2 way switch in the upstairs landing for a touch switch but the terminal connections are different. The old one has 6 terminals, 3 on the top and bottom labelled COM, 1 WAY and 2 WAY. However, the new touch switch just has four terminals, 2 WAY, L, L1 and L2. There is an L3 but no screw in it.



Can anyone tell me the mapping for the old to the new please? Thanks in advance.

 

[SUNRAY]

Hoping someone can help. I'm changing an old 2 gang 2 way switch in the upstairs landing for a touch switch but the terminal connections are different. The old one has 6 terminals, 3 on the top and bottom labelled COM, 1 WAY and 2 WAY. However, the new touch switch just has four terminals, 2 WAY, L, L1 and L2. There is an L3 but no screw in it.

View attachment 409671View attachment 409672

Can anyone tell me the mapping for the old to the new please? Thanks in advance.

What do the instructions say about it?

 

[Echo the husky]

Post a photo and the model number of the new switch. Something doesn't look right there.

 

[pete01]

Post a pic of the actual new sw connections

 

[Harry_W]

 

[Harry_W]

 

[EFLImpudence]

The old one has 6 terminals, 3 on the top and bottom labelled COM, 1 WAY and 2 WAY.

The old two have 6 terminals, 3 on the left and 3 on the right labelled COM, 1WAY and 2 WAY.

 

[Harry_W]

Do I need to upgrade the old 3 gang hallway light switch downstairs for this to work?