HELP REPLACING HONEYWELL ST699

[justincai]

Hi all.
I need some help replacing my old honywell st699 with a new st6300a. the problem is that i have the new installation guide telling how to replace the 699 with the 6300 .
ie
st699 to 6300 L to L , N to N , 3(no) to 4(ch on) , 4(nc) to 2(ch off) , 5(com) not connected , 6(no) to 3(hw on) , 7(nc) to 1(hw off) , 8(com) not connected.

now in my 699 number 8(com) is joined number 5(com) which are then wired to the live.. and there is no wire going to 4(nc) so was wondering where to put wire these up to in the 6300.
any ideas.

 

[ollski]

Not familiar with the 6300 but I would imagine it has integral links.

 

[wilhelm]

why not bang on a new st699?

 

[Mucckker]

Are the old back base plates the same as the new one on ST 699

 

[Dan Robinson]

Yes

 

[Dan Robinson]

If you can't figure out the diagram (nothing to be ashamed of) just swap like for like

 

[Mucckker]

Thanks not bought one yet so not seen diagrams but will look