Dear all,
I’ll be attempting to change my existing bell box (sorry, I don’t know the model and/or manufacturer) with a newly purchased ‘Pyronik belle’ bell box.
Maybe things will be a lot clearer to me once I dismantle the current box and have a look at how it’s wired in, however, I won’t be attempting this until the weekend and looking over the instructions there’s a section which is already somewhat confusing me (see link).
//www.diynot.com/network/nv_london/albums/7789/30501
Basically, the instructions state that the ‘tamper feed’ ought to be linked in to the 0V or 12V contact.
So my questions are:
Am I correct in my understanding of this? I.e. do I actually need to do this? (I would have thought so, otherwise it wouldn't be part of the instructions!) But I just don't know 'how' to link them in. (By the way, I’ll only be contecting this one sounder/bell box, no others).
So really my question is, 'how' do I ‘link’ it across? (Do I use a separate wire/cable which isn’t included with the box, if so, which wire? Does it matter if I go to 0V or 12V?).
(Like I said, this may make a lot more sense to me once I remove the old box and look inside, as this too will probably have the ‘tamper feed’ linked across? However, for the time being, any help/advice would be much appreciated).
[/img]
I’ll be attempting to change my existing bell box (sorry, I don’t know the model and/or manufacturer) with a newly purchased ‘Pyronik belle’ bell box.
Maybe things will be a lot clearer to me once I dismantle the current box and have a look at how it’s wired in, however, I won’t be attempting this until the weekend and looking over the instructions there’s a section which is already somewhat confusing me (see link).
//www.diynot.com/network/nv_london/albums/7789/30501
Basically, the instructions state that the ‘tamper feed’ ought to be linked in to the 0V or 12V contact.
So my questions are:
Am I correct in my understanding of this? I.e. do I actually need to do this? (I would have thought so, otherwise it wouldn't be part of the instructions!) But I just don't know 'how' to link them in. (By the way, I’ll only be contecting this one sounder/bell box, no others).
So really my question is, 'how' do I ‘link’ it across? (Do I use a separate wire/cable which isn’t included with the box, if so, which wire? Does it matter if I go to 0V or 12V?).
(Like I said, this may make a lot more sense to me once I remove the old box and look inside, as this too will probably have the ‘tamper feed’ linked across? However, for the time being, any help/advice would be much appreciated).
[/img]