- Joined
- 4 Mar 2005
- Messages
- 42
- Reaction score
- 0
- Country
I have installed a simple pull switch and bulb holder in my loft.
To get power to it, I broke into the existing circuit and added two connector units and about 10 metres of lighting twin & earth.
My problem is that the bulb lights, but only at about 1/4 of it's expected brightness. Also when I turn it on it doesn't come on immediately, it slowy gets brighter as if I were turning up a dimmer switch.
Any idea what the problem might be ?
Cheers
To get power to it, I broke into the existing circuit and added two connector units and about 10 metres of lighting twin & earth.
My problem is that the bulb lights, but only at about 1/4 of it's expected brightness. Also when I turn it on it doesn't come on immediately, it slowy gets brighter as if I were turning up a dimmer switch.
Any idea what the problem might be ?
Cheers