help with this toilet button replacement

[skuba]

hi everyone

a short while ago, our push button toilet flush started playing up a bit. it would get stuck down so the water was continuously flowing in to the pan. usually, lifting up the tank lid caused it to pop back out

anyway, the button has finally completely broken, so i'm looking for a replacement. i've managed to prise it away from the flush lever, so i'm hoping i can just replace the button

can anyone tell me where i can get this sort of button from? i've had a look online but there are a myriad of options!

thanks

 

[terryplumb]

think you will probably need to replace the valve ,unless someone recognises the make. take pic inside cistern of the valve.

 

[HERTS P&D]

See below:

http://www.ebay.co.uk/itm/WIRQUIN-D...138&hash=item33d29eb582:g:mad:dQAAOSw4YJZY6-b

Andy

 

[skuba]

thanks andy

 

[HERTS P&D]

You could always buy a new complete flush valve and just use the button but keep the rest for spares.

http://www.ebay.co.uk/itm/WIRQUIN-J...035471&hash=item3d4539a251:g:g3EAAOSw7ZlZl5s1

Andy