• Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.

here`s a good un

Status
Not open for further replies.
boiler and stat are in back bedroom

stat set to full (30)cos wife is always cold
 
no its my other bedroom and yes the trv is fully open,unless i turn it 1/4 down to stop the noise.When the noise starts again i re-open it fully and it stops
 
remove it. you should not have a room with the wall stat in and a trv as well,
as they play against each other.
you can unscrew your plastic top half from the valve by hand. on the knurled section.
 
You.. roomstat does not affect a noisy trv, mentioning roomstat is only confusing the guy
 
hi spec

thanx so much for your time and assistance...as the topic seems to be getting heated i will try out your suggestion and re-post if the problem is solved (or not)

once again thanx
 
you will more than likely still have to change the other trv cause it's faulty.
but just stating about the room with the wall stat is you don't fit a trv in that room :wink:

don't worry about the pratts as they don't have any time for people , they think everyone one should understand just cause they do. :lol:
 
I can tell you what the problem is and how to cure it if you answer the dam question.

Take the head off the radiator valve that makes the noise and the problem is solved.

yes or no.
 
I can tell you what the problem is and how to cure it if you answer the dam question.

Take the head off the radiator valve that makes the noise and the problem is solved.

yes or no.
take head off the radiator????? not literally i hope

wot do u mean pls
 
C`mon Hi-spec calm down.

Namsag is one of the very knowledgeable chaps on here whom you can turn to for advice or a slating :wink:

Not many "pratts" as you put it spend time helpping others in ther free time :shock:

The op wanted info not a complete run down of how a system and controls should be laid out :wink: . you must of been in the game long enough to know 9 out of ten heating systems will have something not upto current standards 8)

Chill dude :P
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Status
Not open for further replies.
Back
Top