Hive and Potterton Titanium

[Davidc75]

Hi,

I am currently trying to install a single channel Hive to a Potterton Titanium boiler.

I have ran a 4 core cable from the wiring on the boiler to the Hive.

I’ve wired as follows;

Live - Live
Neutral - Neutral
230v Live Out - Common
Switched Live In - Heating On (NC)

I have switched the timer on the boiler to the off position however the Hive does not turn on the heating. Has anyone installed one of these before.

 

[Davidc75]

 

[Johnmdc]

You need to leave the timer on constant.

 

[bernardgreen]

I have ran a 4 core cable from the wiring on the boiler to the Hive

Invest in a length of 5 core cable and thus avoid the mis-use of the Earth conductor as a Live conductor

 

[michaeldiy1234]

hi i am having the same problem wired all up OK and went to set the timer to on all the time and the boiler just fires up on it own ,with out the hive being on any help please

 

[ianmcd]

hi i am having the same problem wired all up OK and went to set the timer to on all the time and the boiler just fires up on it own ,with out the hive being on any help please

You are Hi Jacking a 6 year old post against site rules, please start your own post and state YOUR boiler and post pics of what you have done with YOUR wiring

 

[michaeldiy1234]

Sorry new here thanks

 

[ianmcd]

Sorry new here thanks

If you Hi-Jack an old thread it just gets too confusing, post a fresh thread and add pics of what you have, and you will get all the help you need