-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Hive Help
- Thread starter Joe Fahmy
- Start date
Brown wire to hive L
Blue to hive N
The wire in B goes to hive 3
Remove the link wire from L to A you don't need it.
The yellow and green shouldn't be used as a live so at least sleeve it brown.
Blue to hive N
The wire in B goes to hive 3
Remove the link wire from L to A you don't need it.
The yellow and green shouldn't be used as a live so at least sleeve it brown.
Surely you won't be putting your Hive centre where the thermostat is. The Hive needs to go near the wiring centre.
The Hive stat would go near where the old stat is/was. Or in another/ better location.
And (as above) using the earth conductor as the switched live is a big NO. That's the sign of a cowboy.
So more electrical wiring may need to be sorted.
The Hive stat would go near where the old stat is/was. Or in another/ better location.
And (as above) using the earth conductor as the switched live is a big NO. That's the sign of a cowboy.
So more electrical wiring may need to be sorted.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
