Hi all,
I’ve been looking to install Hive in a central heating system made up of:
Glowworm Xtramax HE boiler
Honeywell ST9100C timer
Honeywell rotary thermostat (unsure model number)
I’m not having much success as the wiring has me very confused. I’ve previously installed hive but never seen anything like this.
System has the timer in the kitchen, the thermostat in the hall (complete opposite side of the house) and the boiler in the garage. What I believe is complicating matters is that after speaking to a neighbour I found out the position of the boiler in the garage was moved late in the build from the middle of the wall to the back corner. This has left the junction box below in the middle of the garage.
Original plan was to simply replace the timer in the kitchen with the hive receiver, disconnect and mark the wiring to the original thermostat as disused and cover up the holes. Now I'm thinking it is probably best and easiest to install the receiver in the garage adjacent to the boiler and take spaghetti junction out of the equation.
Can anyone offer some advice on wiring it in? Confused by blues joining blacks etc in the pictures. All help much appreciated.
I’ve been looking to install Hive in a central heating system made up of:
Glowworm Xtramax HE boiler
Honeywell ST9100C timer
Honeywell rotary thermostat (unsure model number)
I’m not having much success as the wiring has me very confused. I’ve previously installed hive but never seen anything like this.
System has the timer in the kitchen, the thermostat in the hall (complete opposite side of the house) and the boiler in the garage. What I believe is complicating matters is that after speaking to a neighbour I found out the position of the boiler in the garage was moved late in the build from the middle of the wall to the back corner. This has left the junction box below in the middle of the garage.
Original plan was to simply replace the timer in the kitchen with the hive receiver, disconnect and mark the wiring to the original thermostat as disused and cover up the holes. Now I'm thinking it is probably best and easiest to install the receiver in the garage adjacent to the boiler and take spaghetti junction out of the equation.
Can anyone offer some advice on wiring it in? Confused by blues joining blacks etc in the pictures. All help much appreciated.