hotpoint washing machine in need of help please!!!

[kayleigh]

Hi i have an hotpoint washer which is 3years old. just the other day it just wouldnt work 3 lights was flashing (its mini load and rinse hold and the on and off switch that is flashing) i have checked the filter and everything i can think off, ive been through all the instructions but nothing i was wondering if any one can help me please.

 

[rocks1]

f01 light 4, motor triac
f02 light 3 motor, jammed/ tacho
f03 lights 3&4 Ntc fault
f04 light 2. pressure sw stuck on empty
f05 lights 2&4, pressure sw stuck on full
f06 lights 2&3, N/A?
f07 lights 2&3&4 heater relay
f08 light 1. heater relay
f09 lights 1&4 eprom/setup error
f10 lights 1&3, pressure switch not sensing
f11 lights 1&3&4, pump/draining error
f12 lights 1&2, communication error
f13 lights 1&2&4, dryer ntc/ fan motor
f14 lights 1&2&3, dryer heater
f15 lights 1&2&3&4, dryer heater relay
f16 N/A
f17 light 4, door lock
f18 light 3 comms error (3 phase motor) power board

 

[kayleigh]

sorry to be so dumb but whats the numbers mean?

 

[rocks1]

the lights on the left , what number lights are flashing 1 and 2. or 2 and 4 ,1 and 3 etc .ignore the on off button .

 

[kayleigh]

hi there its buttons 3 and 4 so what does ntc fault mean please??

 

[rocks1]

ntc is on the heater at the rear of mc remove white cover , make sure connections are tight on the pcb located in the corner . if thats ok then pcb is shot ,ex pcb from here http://www.emwelec.co.uk/. or call hotpoint all in charge inc parts and labour 100.00

 

[kayleigh]

thank you its much appreciated.