How do I program my TV to view a modulated cctv signal?

[Proception]

Hi,
I have connected a camera to a proception modulator through the scart cocket and set the channel to various channels. The problem comes when I try to set my TV up. I'm pressing the auto tune button then trying to locate the cctv on one of the channels found - Am I doing it right or should I be setting my tv up differently to find the signal?
Thanks,

Steve

 

[big-all]

heeelllooo and welcome Proception


if its plugged into a scart the tuner wont find it it only works on the ariel input

the scart will probably be av1/2/3/4 dependant on which av socket its plugged into

if you plug it into the primery av socket [usualy av1] turn the camera off then on it should automaticly come on screen

thats assuming i am understanding what you mean

 

[Gees]

When you set up the modulator with the front panel buttons make a note of the channel number you have set it to. Then with the modulator RF output connected to the aeriel socket on your TV, use the automatic tuning to find the channel. Or better if you can input the channel directly do it that way.