How to dismantle a cement mixer

[vincentianpinner]

I'm trying to transport a big old mixer and it would be easier if it can come apart. I'll add a picture of it. The electrical tape I've put on it is where id like to pull it (along with the drum) away from the motor.
If I do that does it come apart easily and go back easily or could it create another problem.
The other picture is what it's attached to

 

[foxhole]

What brand? Lots of online videos.

 

[Burnerman]

I think you’ll need to release the other, non driven end of the drum....be prepared to cut bolts off with an angle grinder!
John

 

[vincentianpinner]

What brand? Lots of online videos.

There's no brand on it. It's over 30 years old so I'm now sure where it came from. I take you think there's a Possibility it's not straight forward. Looks like I better leave it.

 

[vincentianpinner]

I think you’ll need to release the other, non driven end of the drum....be prepared to cut bolts off with an angle grinder!
John

Yes I've sorted the other end. Not so much of a risk that side. Cheers

 

[Burnerman]

The drum alone will be one hell of a weight.....best leave it complete if you can!
John

 

[cdbe]

The leg/wheels should fold up (they were usually sold in a big cardboard box). The two bolts on the frame below your green tape, but be prepared for them to be seized and maybe sheer off.