- Joined
- 8 Jul 2011
- Messages
- 56
- Reaction score
- 0
- Country
Hi all,
I have a single socket in the kitchen that was used for the dish washer. The dish washer has since been removed and i want to just put a blank plate over the old socket. There is a single live, single neutral and two earth wires (one coming from the cable and one from the current plug socket to the plug casing). I know I need to use terminal blocks for this but am unsure as to what amp rating to use. Do I simply put each wire into a separate input on the strip? Do I need to worry about the additional earth wire if terminating it from the cable?
Thanks a lot!
I have a single socket in the kitchen that was used for the dish washer. The dish washer has since been removed and i want to just put a blank plate over the old socket. There is a single live, single neutral and two earth wires (one coming from the cable and one from the current plug socket to the plug casing). I know I need to use terminal blocks for this but am unsure as to what amp rating to use. Do I simply put each wire into a separate input on the strip? Do I need to worry about the additional earth wire if terminating it from the cable?
Thanks a lot!