I laid down a solid wood floor (which was already factory varnished) and then applied 2 coats of additional Varnish to add protection of spills etc
I now regret putting this varnish on as it's 'peeling off' as it doesnt have a bond or key to the realwood floor
What is the best way to remove this varnish or does the entire floor need to be sanded and re-varnished
Thanks
I now regret putting this varnish on as it's 'peeling off' as it doesnt have a bond or key to the realwood floor
What is the best way to remove this varnish or does the entire floor need to be sanded and re-varnished
Thanks