HI there,
Our boiler has just decided to go on the blink, bt with an ideal should expect this, having had 2 pcb's in 5 years (one after only 1 month of having it!). Its showing LF alternate flashing.
I have cleaned out the condensate trap, refilled and refitted. I have also earthed out the ignition electrode and that fires up whenever the cycle increases the fan speed during its 3 light up attempts. I have also removed the white pipe on the gas valve and found it dry.
After I reset it displays a "3" on the control and runs through its cycle before going to the fault code. Any advice would be gratefully received.
All the best
Jamie
Our boiler has just decided to go on the blink, bt with an ideal should expect this, having had 2 pcb's in 5 years (one after only 1 month of having it!). Its showing LF alternate flashing.
I have cleaned out the condensate trap, refilled and refitted. I have also earthed out the ignition electrode and that fires up whenever the cycle increases the fan speed during its 3 light up attempts. I have also removed the white pipe on the gas valve and found it dry.
After I reset it displays a "3" on the control and runs through its cycle before going to the fault code. Any advice would be gratefully received.
All the best
Jamie