a problem i am having which is weird - i put my immersion heater on today, hadn't used it for years. nothing.
the fuse was fine, i tested it for continuity and the meter sounded. then i tested the heater thermostat which also sounded for continuity.
next i tested my heater element, between L & N and it read 19.2 ohms. which is fine.
so why nothing? no sound when it is on, nothing...
the fuse was fine, i tested it for continuity and the meter sounded. then i tested the heater thermostat which also sounded for continuity.
next i tested my heater element, between L & N and it read 19.2 ohms. which is fine.
so why nothing? no sound when it is on, nothing...