Immersion Heater not working

Joined
19 Jan 2020
Messages
1
Reaction score
0
Country
United Kingdom
Hi all,

I suspect this may need to be something I get my landlord to sort out, but I thought I would get some information first. We have an electric immersion heater that started giving us some trouble before Christmas. It would sometimes fail to heat up overnight on the Economy 7 settings, but the boost always worked. I checked at the time and the reset button on the thermostat had tripped, so pushed it back in. This happened occasionally over the Christmas period, but not consistently, and the switch wasn't tripped at the distribution board.

However this week the overnight heating has stopped entirely, and the reset switch has not been tripped so I can't manually reset it. I've had a look and nothing seems off with the wiring etc, no burn marks around the wall socket, no tripped switches. The only things I can think of (I have no experience with immersion heaters, but I've been googling extensively today) is that either the thermostat has packed up entirely (without tripping the reset button) or the actual electical input into the heater for the economy 7 line is faulty (the boost works fine, as do our storage heaters).

Does that sound about right or is there something I'm missing? Also, is it possible for the reset button on the thermostat to become stuck and prevent it being manually reset? Any advice is appreciated! At least it means I can contact my landlord knowing I've done what I can first.
 
Sponsored Links
You need 2 new immersion elements to be fitted, contact your landlord explaining there is no hot water. Do you have an electric shower?

Andy
 
You need 2 new immersion elements to be fitted, contact your landlord explaining there is no hot water. Do you have an electric shower?

Andy
If the boost works fine ,why two new immersion heaters Andy ?
Have I missed something here ?
 
You need 2 new immersion elements to be fitted, contact your landlord explaining there is no hot water. Do you have an electric shower?

Andy


(the boost works fine,


Only your off peak immersion needs attention, may be the thermostat might be the immersion unit itself, if your storage heaters are working the off peak supply is fine
 
Sponsored Links
I always replace both immersions, even if the top immersion is faulty, you know the bottom one will 'go' soon. So drain it all down and replace both.

Andy
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top