Immersion heater wiring info Req URGENT REQUEST GUYS

[MasterAbacus]

hi all, ive jest been forwarded a picture, not the best qulity i know, of an unwired immersion heater. Appaerently this was not wired up after new cylinder was fitted 18 months agao.... it was new then tho.

What i need to know, as instructions seem to have gone AWOL is where do the wires go.... Its in a cramped environment, so id like to get in, do it and get out.....

Heres the Layout....CU 2.5mm to double pole immersion switch, from there is a heat flex cord/cable 3 core, Live, Nutral Earth.... etc...

I think Ive work out where the earth goes, just not sure about Live / Nutral.

Like i said its not been used for over 18 months, do you think it will be ok to just wire up and try it? The Tank, and Immersion were both new 18 mnths ago.


Rgds



MA


+++++++++++++++
Moderator's note:

I have moved it to heating and plumbing, they probably do Immersion heaters all the time.

Mod Rupert
+++++++++++++++

 

[Chri5]

That picture made my eyes go funny, could you try to focus?

about 10 o'clock there's a stamp on the chassis 'E'- The earth post is beside it.

I can't focus well enough on either the white block at 12 o'clock or what the brown cable is linked between.

About time I had another eye test

 

[MasterAbacus]

That picture made my eyes go funny, could you try to focus?

about 10 o'clock there's a stamp on the chassis 'E'- The earth post is beside it.

I can't focus well enough on either the white block at 12 o'clock or what the brown cable is linked between.

About time I had another eye test

I ALREADY SAID ID WORKED OUT WHRE THE EARTH GOES... doh.... thats not rocket science is it....

As for the picture I said it was blurred, i didnt take it.

Lastly why has this post been moved?

+++++++++++
I explained above. Only trying to help and it is still visible in Electrics UK.

MR
+++++++++++


Come on guys, im desperate for an answer on this one...

 

[Fluffster]

You should watch your tone and reply not even a please or thank you this puts alot of people off.

For your info the live goes into the main block with the thermostat and the neutral on the other stalk next to the earth stalk which you state you think you worked out.
Pete

 

[kevplumb]

live to the stat neutrat to the screw terminal

why aint this in electrics

 

[MasterAbacus]

You should watch your tone and reply not even a please or thank you this puts alot of people off.

For your info the live goes into the main block with the thermostat and the neutral on the other stalk next to the earth stalk which you state you think you worked out.
Pete

Firstly look at my initail post, i think ull find nothing wrong with my tone...

Secondly when i replied, the post had bn moved without an explination.

Thirdly, If you dont like my tone, dont answer my posts, simple. Im sure many people on here have seen me about and never had a complaint before.....

Fourthly Thanks for the reply, its much appriciated, Mwah. x

 

[MasterAbacus]

live to the stat neutrat to the screw terminal

why aint this in electrics

MY THAUGHTS EXACTLY, I POSTED IT THERE INITIALLY....





++++++++++++++++++++++++
Sorry you're dissatisfied.

only trying to help.

MR
++++++++++++++++++++++++

 

[MasterAbacus]

Just having one of them days.....

 

[Fluffster]

Hey we all do just remember its friday, not that it means much to me as I am self building our kitchen extension at the moment.
pete