Hi, I bought brand new Indesit dryer in October. It has stopped heating the air. I believe I may need to reset something. I have removed the back 2 plates but there was nothing underneath. Any ideas?
If its not heating test the exhaust stat, heater stat/(s) and heating element.
Check all vents, filters and hoses are clear.
If those are all ok it could be a faulty timer or pcb.
What I don't understand is why Argos advertise this has a 'reservoir full' indicator when it is vented and not a condenser dryer? Perhaps you could confirm, a) vented or condenser and b) does it have a reservoir full light.
If its not heating test the exhaust stat, heater stat/(s) and heating element.
Check all vents, filters and hoses are clear.
If those are all ok it could be a faulty timer or pcb.
What I don't understand is why Argos advertise this has a 'reservoir full' indicator when it is vented and not a condenser dryer? Perhaps you could confirm, a) vented or condenser and b) does it have a reservoir full light.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local