- Joined
- 21 Jan 2016
- Messages
- 6
- Reaction score
- 0
- Country
Hi everyone the wife's washer/dryer has developed a fault, At the start all is normal flashing red light to indicate power on, load the machine select program close door the door locks & light stops flashing & remains lit constantly and starts to wash all good. But after a few minutes the door lock warning light goes out and the machine stops the cycle light remains lit and the door remains locked. Press reset wait couple of min's door clicks & can be opened red light starts to flash.
Close door press start the door locks but no red lock light & the cycle light is lit but the machine will not run, this is on any program its on washing or drying.
If you unplug from mains leave overnight & it seems to reset and the red lock light works fine but again only for a few min's. It seems like there's something overheating causing the fault but I'm not sure.
Could it be the door lock at fault or am I looking at a mainboard fault any help or guidance greatly received with thanks in advance Geoff
Close door press start the door locks but no red lock light & the cycle light is lit but the machine will not run, this is on any program its on washing or drying.
If you unplug from mains leave overnight & it seems to reset and the red lock light works fine but again only for a few min's. It seems like there's something overheating causing the fault but I'm not sure.
Could it be the door lock at fault or am I looking at a mainboard fault any help or guidance greatly received with thanks in advance Geoff