Integrated LED ceiling lights - best to avoid?

Joined
1 Jul 2012
Messages
48
Reaction score
1
Location
England
Country
United Kingdom
I'm looking at putting up a couple of ceiling lights - circular, 35-50cm diameter, in a breakfast room. I like the look of the LED ones with a wooden surround, but I'm unsure whether I should go for the integrated LED ones (no builbs) or a more traditional 3 or 5 E27 bulb fitment.

The downside of the latter is you see the bulbs as light points when lit, whereas the integrated LED ones shows a uniform light, but I'm nervous of having the electrician fit something that I can't change the bulb in. The supplier says it has warranty, but..

What do you think - am I worrying over nothing?
 
I prefer the light from the integrated fittings, ive got loads all round my house never had one fail, just buy 5 spares....the ones I use just plug in......the make escapes me I'll post it when I remember.

Edit.....Kingsbridge
 
Last edited:
I have a couple of integrated, where my wife came home and said fit that. And the outside light, with the LED's in the top of the carriage lamp facing down, I have to admit it lights the entrance better than the one with a bulb, where the light goes up. But with the integrated one I need a socket adaptor to be able to switch it on/off from in my car, but the bulb one, simply fitted a smart bulb.

Be it an integrated or bulb, in theory they should last the same time. I have LED lights all around my house, and I have not had many failures, but failure rate is not zero, to change a bulb switch off at the wall, and pop in a new bulb, with integrated outside, down a set of steps, can be dangerous in snow or ice, and into the flat below the main house to turn off the power, then replace the integrated with a fitting using a bulb, then down again to turn power back on.

So I don't care if the integrated does give more lumens per watt, I want a bulb, the same with sockets, can get a smart socket, or standard socket with smart adaptor, I will go for the adaptor.

Even if the lamp does not fail, I want the option of fitting a bigger, smaller wattage, higher or lower colour temperature, and with multi-lights in one room, want them to match, having to buy 4 integrated lamps as one has failed, and I can't match it, is not the route I want to go down.

I know I could buy 5 when only using 4 so one spare, bet your life can't find it 2 years latter, or I have used it on something else.

A smart bulb £5, a smart adaptor and integrated lamp and the adaptor costs £10, so no saving.
 
My daughter had 3 of 8 intergrated fail within 6 months , design no longer made so had to replace all 8.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top