How do you control your heating temperature, via the boiler? Press the top 2 buttons at the same time, will need to do it twice (first time wakes it up). If it has S.30 you have a room stat.
You have to press them both at the same time, it should give you the status of the boiler. If it’s not your time switch, and you have no room stat then I’d be looking towards your boiler temperature setting. What happens when you remove the timeswitch, does the heating come on?
Yes i did press them together, I get see pic..I havnt tried removing the switch to see if heating comes on..is it suppose to or not? View attachment 165131
It should come on if you remove the timeswitch, but in that pic if you look in the top left you have s.31, and states summer operation. Try the boiler temperature press the button on top right when back to normal mode, see what temp set to, if it’s to set temp, then it will not come on.
If you took the above photo @ 5.07 am then the clock is correct.
Assuming the photo was taken @ 17.07 then the clock is either 12 hours fast or 12 hours slow.
If you took the above photo @ 5.07 am then the clock is correct.
Assuming the photo was taken @ 17.07 then the clock is either 12 hours fast or 12 hours slow.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local